BRZHN - M-TONER 25-P01, M95-0381-000

  • MSDS: BRZHN
  • Manufacturer: CANON USA INC
  • Product Name: M-TONER 25-P01, M95-0381-000
  • National Stock Number: 6850-00N040151
Product Identification

Product ID:M-TONER 25-P01, M95-0381-000
MSDS Date:12/01/1991
FSC:6850
NIIN:00N040151
MSDS Number: BRZHN

Responsible Party
CANON USA INC
ONE CANON PLAZA
LAKE SUCCESS, NY 11042
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 516-488-6700

Cage: 1BA63

Contractor
CANON USA INC
LAKE SUCCESS, NY 11042 US

Telephone: 516-328-5600

Cage: 1BA63

Ingredients

STYRENE ACRYLATE COPOLYMER

CAS: 25153-46-2

Fraction By Weight: 55-60%


IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 35-40%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3 (FE)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL RESPIRATORY TRACT IRRITATION
MAY OCCUR AS WITH EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL: REMOVE FROM EXPOSURE. EYE: NO SPECIFIC HAZARD IS KNOWN
TO CANNON. HOWEVER, ANY MATERIAL THAT CONTACTS THE EYE MAY BE
IRRITATING. FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. IF
IRRITATION PE RSISTS CONTACT A PHYSICIAN. SKIN: WASH WITH SOAP AND
WATER. INGEST: GET MD IMMEDIATELY .

Fire Fighting

Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THIS MATERIAL, LIKE MOST ORGANIC
MATERIALS IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.

Accidental Release

Spill Release Procedures:SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER
CARBON.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED SAFETY GLASSES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4 (H*2O=1)
Evaporation Rate & Reference:NEGLIGIBLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE POWDER, SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLIG

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL,
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND CARBON MONOXIDE.

Disposal

Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUES REQUIRED. ENSURE
COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.